Average Reviews:
(More customer reviews)This is a great preamp for the price range if you only need one input preamped. I do a podcast and so only record myself, generally. This has a built in compressor and equalizer which add to the cost/benefit ratio. The 60dbs of preamp gain should be able to handle most dynamic and condenser mics. I can't say enough good things about this preamp, it's easily equal to one in the $500 range.
Click Here to see more reviews about: Joemeek ThreeQ Pro Channel Strip
The Joe Meek threeQ is like having one channel of a professional recording studio in a small box. It takes a microphone or instrument, amplifies it, compresses and equalizes it ready to be recorded. Simple to use yet extremely powerful, the threeQ will bring out the best in any microphone or instrument and give the gloss of a professional studio production to all your performances. As well as recording it will also be found useful for live work. Joe Meek ThreeQ Features PREAMP GAIN: Sets the amount of audio amplification. Too little gain and the sound will be too quiet; too much and the signal could become distorted. PEAK LED: Lights 6dB below clipping. LINE Switch: Selects the Line (jack) input instead of the Mic (XLR) input. The LED lights when active. COMPRESS: Sets the level of signal (or "Threshold") above which the signal starts to be compressed. ATTACK: Sets how quickly the compressor responds to peaks abovethreshold. RELEASE: Sets the time during which the signal returns to its normal size after compression. In general, the longer the time, the less obvious the compression. COMPRESSION METER: 4-LED bargraph indicates the amount of gain reduction in dB, which is taking place at any given moment. COMP Switch: Turns the compressor on. The LED lights when active. LF: Controls the volume of Low Frequencies or "Bass" in the audio spectrum. 15dB of boost or cut is available around 80Hz. MID: Controls the middle frequencies in the audio spectrum. 15dB of boost or cut is available at the selected frequency. MID FREQ: Sets the frequency at which the MID control operates,anywhere from 300Hz to 5kHz. HF: Controls the volume of the High Frequencies or "Treble" in the audio spectrum. 15dB of boost or cut is available around 12KHz. EQ Switch: Turns the equalizer on. The LED lights when active. OUTPUT GAIN: Volume control or "Fader" for the outputs of the threeQ. VU METER: 8-LED bar
Click here for more information about Joemeek ThreeQ Pro Channel Strip
No comments:
Post a Comment