Showing posts with label martin guitar. Show all posts
Showing posts with label martin guitar. Show all posts

5/02/2012

Martin X Series DX1AE Acoustic-Electric Review

Martin X Series DX1AE Acoustic-Electric
Average Reviews:

(More customer reviews)
I'm a beginner and was looking for a guitar I could grow into. I did my research and in the end, this guitar was perfect! I've owned it for about a month and it has exceeded my expectations. Others have pointed out disappointment in regards to the guitar's origin (Mexico). No one having done ANY research would be surprised by this. I feel the guitar is held to the same Martin standards as the one built in the states relative to it's price point.

Click Here to see more reviews about: Martin X Series DX1AE Acoustic-Electric

Play your favorite tunes on this dreadnought acoustic/electric guitar that features a solid Sitka spruce top and mahogany high-pressure-laminate body for rich, warm tones. The Fishman Sonitone pickups provide reliable sound.

Buy Now

Click here for more information about Martin X Series DX1AE Acoustic-Electric

Read More...

1/31/2012

Yamaha APX900 - Natural Acoustic Electric Cutaway Guitar Review

Yamaha APX900 - Natural Acoustic Electric Cutaway Guitar
Average Reviews:

(More customer reviews)

Why this is a good guitar
Thinline acoustic-electrics are not known for their acoustic tone, but the APX900's tone is acceptable for at-home strumming and practice and even light sing-along duty. It sounds a little dull acoustically and it's not particularly loud, but that's an acceptable compromise to limit feedback when plugged in. The amplified tone is bright--or it can be whatever you want it to be, from dark and thumpy to incisive, from a laid-back tone to jangly with the mids cut and the bass and treble turned up. Like any acoustic-electric, it feeds back if you get in front of the amplifier or your PA speaker, but a provided heavy rubber soundhole plug reduces feedback.
It's hard to find a mid-priced acoustic-electric thinline guitar that doesn't sound thin or brassy, but Yamaha's unique multiple contact pickups sound better than the typical under-saddle piezo pickups found on most competing guitars. The APX900 is especially nice because it has two additional pickups, one on the bass side, one on the treble, each with a level control on the preamp. So you can customize the bass and treble response to your liking. The onboard tuner is accurate and the electronics package is well thought out. The preamp controls adjust through a very wide range of cut and boost.
The materials and finish of the guitar are beautiful--nice woods, deep gloss finish. The plastic soundhole ring is perhaps a little cheesy, but it prevents damage to the edge of the soundhole from enthusiastic picking. The neck is nicely shaped and the cutaway gives access to the higher frets. The gold hardware is pretty, but superfluous.
Why this guitar needs work
I've sampled enough of these guitars to believe that they all come through with essentially the same setup. The strings are too high at the nut and at the bridge and it's impossible to play anything intricate or fast. Most every guitar in this price range has the same flaw because manufacturers won't take the time to do a proper setup and they can't be sure that a low, comfortable action might not wind up too low once the guitar has been shipped, stored, and finally sold. You generally don't find good setup until the price goes over $1000.
I'm fortunate to have the special files to create deeper string grooves for the nut and the tools to lower the height of the bridge saddle. A proper setup on this guitar makes a world of difference in playability, but it needs more: The frets have a matte finish instead of a mirror finish, and they're somewhat flat-topped. Again, this is common in the price range. A guitar repairman can put the proper rounding on the frets and bring them to a high polish, for another major stride in playability.
The final step is to simply throw away the provided strings and replace them with high-quality strings such as Martin MarquisMartin Acoustic String Combo 3 Pack; M2100 Light Marquis Phosphor Bronze, MSP4100 Light Phosphor Bronze and MSP3100 Light 80/20 Bronze or Elixir Elixir Light Nanoweb Acoustic Guitar Strings. The provided strings are touted as anti-rust, but they are draggy, with much friction under your fingers.
With a good setup and strings, the APX900 competes with guitars that cost $400 to $600 more.

Click Here to see more reviews about: Yamaha APX900 - Natural Acoustic Electric Cutaway Guitar

What a guitar! The newest member of the APX family, the APX900 features top-quality flamed maple back and sides and a solid spruce top. It delivers a rich, mature tone, with a punchy projection and a bright, long-ringing sustain. A lush and tonally versatile amplified repertoire comes of a newly designed 3-Band preamp, whose adjustable mid-band frequency covers a broad 80Hz - 10kHz spectrum. This not only allows control over the midrange but enables reshaping part of the low and high bands in addition to the dedicated bass and treble controls.

Buy NowGet 42% OFF

Click here for more information about Yamaha APX900 - Natural Acoustic Electric Cutaway Guitar

Read More...

11/05/2011

Martin DCX1E Acoustic-Electric Guitar Review

Martin DCX1E Acoustic-Electric Guitar
Average Reviews:

(More customer reviews)
I own a Martin DCX1E, and like it pretty well. It plays well and has a 'Martin-like' sound. Why do I say 'Martin-like'? Because the body and sides are not wood. They are made of a laminate, not unlike formica. I know, that sounds cheap, but it actually has turned out to be pretty successful for me, and apparently for Martin. It is tough stuff. The top of the guitar is solid Sitka spruce, which is as it should be on a higher-end guitar. So how does it sound? Because they use Martin bracing and a solid top, the instrument sounds pretty much like a Martin, but because of the laminate back and sides, the guitar has noticably less volume than an all wood guitar. The sound is still good, just a little quieter than you would expect. It does retain the resonant low end which characterizes Martins. This IS an acoustic/electric, and if you play it electrically, the lack of acoustic volume is not an issue. The guitar has a piezo pickup under the bridge (pretty standard for A/E guitars), which is mated to a Fishman EQ/preamp, which sounds good through a regular amp, and even better (Wow!)through a PA (use a DI box, though). If you are playing electrically, you may have feedback problems. If so, get a Planet Waves Screeching Halt sound hole plug. Now, here's some other stuff. The neck and the action are pretty good, although I had an action job done by a luthier to make it better. The neck is a little different, too, in that it is laminated. Some people pooh pooh this, but I like the looks, and have never had any problem with it. So, if you get this guitar, I think you will like it..........except for one thing.........After a year and a half, my frets wore out big time. In 45 years of playing, I have NEVER worn out the frets on any guitar, or even come close. Yahdah, yahdah, I won't bother repeating the whole story. Suffice to say, Martin denied that their guitar had a problem, and would not stand behind their product. My luthier, who is "THE" luthier in a city of 2M people, confirmed to me that Martin will not honor their warranty for any fret issues. It would have been nice to know that up front, and frankly, I would not have bought the guitar if I had known that, since a fret job cost me $400. Considering that I paid $700 for the Martin, I could have bought one hell of a guitar for $1,100. You'd think with all the Martin-playing people who espouse social causes and the rights of the down-trodden underclasses, that Martin might have a conscience, too. Forget it. Martin is just another big company, like the rest of them. I wonder how long it will take them to scream bloody murder and make Amazon take this review down? Until then, Rock On ya'all.

Click Here to see more reviews about: Martin DCX1E Acoustic-Electric Guitar

The DCX1E Mahogany Acoustic-Electric Guitar gives you the full, sweet sound of a Martin acoustic with a cutaway for ease of playing. Fishman Classic 4 Sonicore electronics make it stage and studio friendly, and its price won't break your back. Solid spruce top with A-frame X-bracing, HPL sides and back, inlaid Boltaron rosette, black Micarta fretboard. Limited lifetime warranty. Martin DCX1E Acoustic-Electric Guitar Features: 14-fret dreadnought cutaway body Solid spruce top HPL back and sides Limited lifetime warranty Martin DCX1E Acoustic-Electric Guitar Includes: limited lifetime warranty

Buy Now

Click here for more information about Martin DCX1E Acoustic-Electric Guitar

Read More...